Complete Tyre
Checks in
30 Seconds

Measure tread depth without the guesswork. Catch defects before they cause problems. Know exactly when to replace, not too early, not too late.

30s
Per Tyre
±0.5mm
Accuracy
100%
Consistent
0
Extra Equipment
30s Per Tyre
±0.5mm Accuracy
TREAD OK NO DEFECTS
The Problem

Why Manual Tyre Checks Keep Falling Short

Ask three technicians to inspect the same tyre and you will often get three different verdicts. Manual processes introduce risk at every step.

Inconsistent Results

Manual gauges demand multiple measurements per tyre. Visual checks are only as good as the person doing them, and when inspections are rushed, subtle cracks and bulges get missed entirely.

Premature Replacement

When checks rely on gut feel, tyres often get pulled too early. That translates directly into unnecessary spend across your entire fleet over the course of a year.

Over-Extended Run Time

The opposite problem is equally damaging. Running tyres too long risks a breakdown on the road, with all the costs and delays that come with it.

No Inspection Record

Without documented evidence, warranty claims become arguments. Without historical data, you cannot forecast replacements or spot patterns in premature wear.

The Process

How AI Tyre Inspection Works

Straightforward enough that any driver or technician can do it without training.

1

Photograph the Tyre

On-screen guides show the correct angle and distance. No specialised equipment required, just the phone already in your pocket.

2

Automatic Sidewall Reading

The AI identifies brand, model, size, and serial number and matches everything to the right tyre record without any manual input.

3

Full Defect Scan

Scans for cuts, cracks, bulges, exposed cords, embedded objects, irregular wear patterns, and shoulder damage in seconds.

4

Severity Rating and Report

Every defect is marked in the image and given a severity rating so you know exactly what you are dealing with and how urgently it needs attention.

Detection Capabilities

What the AI Is Actually Looking For

Four inspection areas, each with professional-grade accuracy, completed automatically in a single pass.

Tread Depth and Wear

  • Measures tread to within 0.5mm
  • Centre and shoulder wear
  • Feathering and cupping
  • Links wear to root cause

Surface Defects

  • Cuts, cracks, punctures
  • Damage visual checks miss
  • Early impact damage
  • Embedded debris

Structural Issues

  • Bulges and sidewall separation
  • Belt separation
  • Hidden serious damage
  • Severity rated for action

Tyre Identification

  • Manufacturer, model, size
  • Load and speed ratings
  • Full DOT code capture
  • No manual typing needed
Why It Matters

What Makes This Worth Using Day to Day

A manual gauge check takes ten to fifteen minutes per vehicle. The AI does the same job, more thoroughly, in thirty seconds per tyre.

The AI applies the same standard to every inspection regardless of who is holding the phone or how busy the yard is.

Early defect detection reduces roadside failures. Accurate tread data means replacing tyres on real measurements, not gut feel.

Inspection history lets you track wear progression, compare tyre brands, and forecast replacements far enough ahead to budget properly.

10-15min
Per vehicle for a manual gauge check
vs 30s
Per tyre with AI, including ID and defect detection
±0.5mm
Matching professional gauge standards
Use Cases

Where It Fits Into Your Operations

From daily checks to seasonal changeovers, every step becomes documented, consistent, and data-driven.

Routine Maintenance

Replace Subjective Assessment

Replaces inconsistent visual checks with actual measurement data across every vehicle in your fleet, every time.

Pre-Trip Checks

Verify Before Every Haul

Drivers verify tyre condition in seconds and the system documents the state of each tyre before a long run begins.

Seasonal Changeovers

Know What Needs Replacing

Record condition when sets come off. Know exactly what needs replacing before they go back on.

Warranty Claims

Documented Evidence

Inspection reports provide documented evidence that supports a premature failure claim without arguments.

Fleetable Integration

How It Connects With Fleetable

Every tyre is tracked from installation through to removal with a complete history attached.

Cost per kilometre is calculated by brand and model so you can see which tyres are delivering real value.

Replacement timing is forecast based on actual wear data, not estimates or averages.

Everything feeds into maintenance scheduling automatically so nothing catches you off guard.

Requirements

What You Need to Get Started

Smartphone iPhone or Android
Internet For AI processing
Fleetable All subscribers

All commercial tyre types supported including steer, drive, trailer, and spare.

FAQ

Common Questions

How accurate is the tread depth measurement?

It measures to within 0.5mm, the same standard as professional tread depth gauges. You get instrument-grade accuracy from a standard smartphone camera.

Do I need any special equipment?

No. Your existing iPhone or Android is all you need. No additional gauges, scanners, or hardware purchases required.

Does it need an internet connection?

Yes, an internet connection is required for AI processing and syncing data to Fleetable. A standard mobile data connection is sufficient.

Which tyre types does it work with?

All commercial vehicle tyres, including steer, drive, trailer, and spare tyres across all major manufacturers and models.

How long does an inspection actually take?

Thirty seconds per tyre, including ID recognition and full defect detection. That covers everything a manual inspection would check and a great deal more.

Start Making Tyre Decisions Based on Data, Not Instinct

Replacing tyres too early costs money you do not need to spend. Running them too long risks failures you cannot afford. Precise inspection data removes both problems.

Get Started with Fleetable